Let’s Talk About the 700mm Carbon Infrared Lamps
If you’re looking for a way to get a lot of heat into a 700mm space, fast, these carbon lamps are your best bet. We built them to be absolute workhorses—220V, 2500W, and designed to get scorching hot the second you flip the switch. The Power Side of Things Pushing 2500W across that 700mm length means you aren’t sitting around waiting for things to warm up. It’s much faster than those old quartz tubes. Just a heads-up: since these pull a decent amount of power, double-check your wiring and breakers. You don’t want to deal with burnt-out terminals just because the circuit wasn’t ready for the load. Why Carbon? Here is the real secret: carbon filaments don’t just heat the surface. They push heat deeper into whatever material you’re working with. To keep things from breaking, we wrap the filament in high-purity quartz. It’s tough. It can take a beating in a dirty, loud industrial shop without flinching. And if you’re swapping out an old halogen unit? As long as your brackets are 700mm, these usually slide right in. Making Them Work in the Real World These are perfect for things like PET blowing, curing paint, or running industrial drying ovens. But there’s a catch. When you’re throwing out this much heat, your cooling system has to keep up. If the air doesn’t move and the ends of the lamp get too hot, those seals are going to fail. It’s that simple. One last tip: use high-temperature leads. Trust me. You don’t want your insulation melting into a puddle right next to the heat zone.